HP Survivable Branch Communication zl Module powered by Microsoft Lync Planning and Design Guide 2011-02

4-81
Example Solutions
Solution
Figure 4-71. Setup Wizard—Quick Setup Start Page
7. In the window that is displayed, click Next.
8. The Boards section is automatically populated with the telephony cards
that you have installed in the SBM. Select the check box for a board that
you want to use.
9. The Interfaces section is automatically populated with an interface for
each interface on the card. Select the check boxes for the interfaces that
you want to use.
Make a note of the wanpipe ID for each interface; you might need this
information later for troubleshooting.
10. In this solution, you have multiple telephony cards. Select the second card
and its interfaces.