HP Survivable Branch Communication zl Module powered by Microsoft Lync Planning and Design Guide 2011-02

4-83
Example Solutions
Solution
Figure 4-73. Setup Wizard—Country Selection Page
14. Click Next.
Figure 4-74. Setup Wizard—PSTN Digital Configuration Page
15. You should have obtained the correct settings for your PSTN connections
from your carrier. In this example, you are using the default T1 values.
16. Click Next.
17. For Transport, select the protocols that your data center contact told you
to use for the Media Gateway’s (PSTN gateway’s) listening protocol. In
this example, select TLS, which is the recommended setting.
18. The default port for the protocol is displayed next to the check box. Leave
the default.