HP Survivable Branch Communication zl Module powered by Microsoft Lync Planning and Design Guide 2011-02

4-84
Example Solutions
Solution
Figure 4-75. Setup Wizard—SIP Configuration Page
19. Leave the default setting for Primary IP Address.
20. For Media encryption level, select Require Encryption. (This is the setting
for this solution; you could also leave the default setting.)
21. Click Next. The Call Routing Configuration page is displayed.
22. The SIP Transport for outgoing calls field is automatically populated with
TLS.
23. For Primary SIP Server Address, type the SBM’s FQDN. For this example,
type seattle_sbm.example.hp.com.
24. The Primary SIP Server Port field has the default value for TLS. For this
example, leave the default setting.