HP Survivable Branch Communication zl Module powered by Microsoft Lync Planning and Design Guide 2011-02

4-94
Example Solutions
Solution
Figure 4-88. Setup Wizard—Place Lync Test Call (Success)
47. After the call succeeds, click Stop next to Call Logging if you have enabled
this feature.
48. The Installation and Configuration Complete page displays the status for each
of the services running on the SBM.
49. Click Finish Installation Process to launch the SBM Dashboard, from which
you will monitor the SBM and perform any ongoing maintenance tasks.
50. At this point, you might want to run a few more tests, to verify that all
features (in particular, emergency calls) are functioning correctly.
You have completed the installation of the SBM. For instructions on ongoing
management, refer to the HP Survivable Branch Communication zl Module
powered by Microsoft Lync
TM
Administrator’s Guide.
Assign Branch Users to the SBM
After the SBMs have been installed and tested, the CS Administrator (or CS
User Administrator) can assign users at each branch office to the local SBM’s
pool.
1. In the Lync Server 2010 Control Panel, click the Users tab.