HP Survivable Branch Communication zl Module powered by Microsoft Lync Planning and Design Guide 2011-02

3-12
Ready the Data Center for an SBM Deployment
Communicate Information to the SBM Administrator
The SBM administrator is a member of the RTCUniversalSBATechnicians
group. You could give this group permission to enroll for Web Server certifi-
cates. Alternatively, you could have the domain administrator give the SBM
administrator the credentials for an account that has this permission already.
Communicate Information to the SBM
Administrator
The SBM administrator will require the following information to install the
SBM and complete its Setup Wizard.
■ Hostname (computer name) for the SBM
The SBM’s default hostname is its serial number, which the administrator
can find on the back left corner of the module’s physical hardware.
Default hostname: ______________________________
Also give the administrator the SBM’s permanent hostname, which is the
name in the SBM’s domain computer account.
Permanent hostname: __________________________
Permanent FQDN: _____________________________
Note In this guide, hostname and computer name refer to the same name. For
example, the hostname (computer name) is set to HP-SBM. The domain name
is example.hp.com. The FQDN is HP-SBM.example.hp.com.
■ The default username and password for the SBM’s local Administrator
account
•Username = SBMAdmin
• Password = P@ssw0rd
Note As you see, the local Administrator username has been changed for security.
■ The new password that the technician should assign to the SBM’s local
Administrator account:
New local administrator password: ________________