HP Survivable Branch Communication zl Module powered by Microsoft Lync Planning and Design Guide 2011-02

3-13
Ready the Data Center for an SBM Deployment
Communicate Information to the SBM Administrator
■ The credentials of the domain user in the RTCUniversalSBATechnicians
group:
Username: ___________________________________
Password: ___________________________________
■ Either:
• A .pfx certificate/private key file
Certificate filename: _______________________
Private key password: ______________________
• Instructions on how the certificate should be requested:
– Generate a request manually
– Request a certificate automatically
Credentials for the user who requests the certificate only if the
CA administrator has decided that the SBM administrator will
generate the certificate in this way:
Username: ___________________________________
Password: ___________________________________
■ Optionally, CA certificate chain file
This file is required if your domain does not use GPOs to push the CA
certificate to domain computers.
Filename: ___________________________________________
■ Transport protocol for the Media Gateway, either:
• TLS (recommended)
•TCP
This is the protocol that the gateway uses to listen for communications
from the Lync solution.
■ Local listening port for the Media Gateway only if it is not standard
This is the listening port that the CS Administrator defined for the PSTN
gateway when adding the SBM as a survivable branch appliance. Figure 3-1
on page 3-14 shows the default ports for TCP and TLS marked with 1.
Non-standard listening port: ____________________________