HP Switch Services Modules - HP SECBLADEII-CMW520-F3171P05 Release Notes

HP SECBLADEII-CMW520-F3171P05
Release Notes
Hewlett-Packard Development Company, L.P.
31
| <3> Enter Ethernet SubMenu |
| <4> File Control |
| <5> Modify BootWare Password |
| <6> Skip Current System Configuration |
| <7> BootWare Operation Menu |
| <8> Clear Super Password |
| <9> Storage Device Operation |
| <0> Reboot |
=============================================================
Enter your choice(0-9):
The main menu is described in Table 11 .
Table 11 Main menu
Menu item Description
<1> Boot System Boot an application from the CF card.
<2> Enter Serial SubMenu
Enter the serial submenu.
For details, see “Serial submenu” on page 32.
<3> Enter Ethernet SubMenu
Enter the Ethernet submenu.
For details, see “Ethernet submenu” on page 32.
<4> File Control
Enter the file control submenu.
For details, see “File control submenu” on page 33.
<5> Modify BootWare Password Modify the BootWare password.
<6> Skip Current System
Configuration
Ignore the current system configuration.
The operation is one-off valid for the current boot. If you want
the SecBlade card to ignore the current configuration at the
next boot, you need to perform this operation.
<7> BootWare Operation Menu
Enter the BootWare operation submenu.
For details, see “BootWare operation submenu” on page 33.
<8> Clear Super Password
Clear the super user password.
The super user password is required in user level switching.
By default, no super user password is set.
The setting is valid only for the first reboot of the SecBlade
card and the super user password will be restored next time
the SecBlade card reboots.
<9> Storage Device Operation
Enter the storage device operation submenu to select
applications from a storage device to boot the SecBlade
card.
<0> Reboot Reboot the SecBlade card.