HP Switch Services Modules - HP SECBLADEII-CMW520-R3175 Release Notes Release Notes

17
<Sysname> tftp 192.168.0.2 put system.xml
File will be transferred in binary mode
Sending file to remote TFTP server. Please wait... |
TFTP: 10324 bytes sent in 0 second(s).
File uploaded successfully.
<Sysname>
Upgrading the system software
This configuration example was created and verified on Feature 3174P10 for the system
software image file fw_card.bin.
1. Execute the tftp get command in user view to download the system software image
file, for example, fw_card.bin, to the CF card on the firewall card.
<Sysname> tftp 192.168.0.2 get fw_card.bin
File will be transferred in binary mode
Downloading file from remote TFTP server, please wait...\
TFTP: 19790016 bytes received in 89 second(s)
File downloaded successfully.
<Sysname>
2. Execute the boot-loader command in user view to load the file fw_card.bin and
specify the file as the main image file at the next reboot.
<Sysname> boot-loader file fw_card.bin main
This command will set the boot file. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on sl
ot 0!
<Sysname>
3. Execute the display boot-loader command in user view to verify that the file has been
loaded.
<Sysname> display boot-loader
The boot file used this time:cfa0:/main.bin attribute: main
The boot file used next time:cfa0:/fw_card.bin attribute: main
Failed to get the backup boot file used next time!
Failed to get the secure boot file used next time!
<Sysname>
4. Execute the reboot command in user view to reboot the firewall card.
<Sysname> reboot
Start to check configuration with next startup configuration file, please wait.
........DONE!
This command will reboot the device. Continue? [Y/N]:y
System start booting...
…
5. After the reboot is complete, perform the display version command to verify that the
system software image is correct.
<Sysname> display version
HP Comware Platform Software
Comware Software, Version 5.20, Feature 3174P10