HP Switch Services Modules - HP SECBLADEII-CMW520-R3175 Release Notes Release Notes

20
125 Using existing data connection
226 Closing data connection; File transfer successful.
FTP: 19790016 byte(s) received in 88.243 second(s), 224.00K byte(s)/sec.
[ftp]
2. Execute the quit command in FTP client view to return to user view.
[ftp] quit
221 Service closing control connection
<Sysname>
3. Execute the boot-loader command in user view to load the file fw_card.bin and
specify the file as the main image file at the next reboot.
<Sysname> boot-loader file fw_card.bin main
This command will set the boot file. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on sl
ot 0!
<Sysname>
4. Execute the display boot-loader command in user view to verify that the file has been
loaded.
<Sysname> display boot-loader
The boot file used this time:cfa0:/main.bin attribute: main
The boot file used next time:cfa0:/fw_card.bin attribute: main
Failed to get the backup boot file used next time!
Failed to get the secure boot file used next time!
<Sysname>
5. Execute the reboot command in user view to reboot the firewall card.
<Sysname> reboot
Start to check configuration with next startup configuration file, please wait.
........DONE!
This command will reboot the device. Continue? [Y/N]:y
System start booting...
…
6. After the reboot is complete, perform the display version command to verify that the
system software image is correct.
<Sysname> display version
HP Comware Platform Software
Comware Software, Version 5.20, Feature 3174P10
Copyright (c) 2010-2012 Hewlett-Packard Development Company, L.P.
HP SecBlade FW uptime is 0 week, 0 day, 1 hour, 52 minutes
CPU type: RMI XLR732 1000MHz CPU
2048M bytes DDR2 SDRAM Memory
4M bytes Flash Memory
247M bytes CF0 Card
PCB Version:Ver.A
Logic Version: 3.0
Basic BootWare Version: 1.28
Extend BootWare Version: 1.38