HP Switch Services Modules - HP SECBLADEII-CMW520-R3175 Release Notes Release Notes

23
Accessing the BootWare menu
1. Power on the firewall card, and you can see the following information:
System start booting...
Booting Normal Extend BootWare........
****************************************************************************
* *
* HPA Series SecBlade FW Module BootWare, Version 1.50 *
* *
****************************************************************************
Copyright (c) 2010-2011 Hewlett-Packard Development Company, L.P.
Compiled Date : Apr 5 2011
CPU Type : XLR732
CPU L1 Cache : 32KB
CPU Clock Speed : 1000MHz
Memory Type : DDR2 SDRAM
Memory Size : 2048MB
Memory Speed : 533MHz
BootWare Size : 1536KB
Flash Size : 4MB
cfa0 Size : 247MB
CPLD Version : 3.0
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
…
NOTE:
The command outputs are for reference only.
2. Press Ctrl + B at the prompt.
Please input BootWare password:
3. Enter the BootWare password at the prompt to access the BootWare menu.
By default, no password is required.
If three password attempts are failed, the system reboots.
Note: The current operating device is cfa0
Enter < Storage Device Operation > to select device.
===========================<EXTEND-BOOTWARE MENU>=================== ========
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Modify BootWare Password |