HP Switch Services Modules - HP SECBLADEII-CMW520-R3175 Release Notes Release Notes

26
Field
Description
Gateway IP Address
Set a gateway IP address if the firewall card is on a different
network from the serv er.
FTP User Name
Set the username for accessing the FTP serv er. This username
must be the same as configured on the FTP server. This field is
not available for TFTP.
FTP User Password
Set the password for accessing the FTP server. This password
must be the same as configured on the FTP server. This field is
not available for TFTP.
3. Select an option in the Ethernet submenu to upgrade a system software image. For
example, enter 2 to upgrade the main system software image.
Loading.......................................... ...........................
............................................................................
.........................Done!
31911744 bytes downloaded!
Updating File cfa0:/main.bin...............................................
....................................................Done!
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is cfa0 |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Update Backup Application File |
|<4> Update Secure Application File |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-5):
When you enter a number in the range of 1 to 4 and the system detects that a file with
the same name exists on the firewall card, the system gives you a message and asks
you whether to overwrite the existing file.
 Enter Y, and the file is updated.
 Enter N, and the existing file is not changed. The upgrading fails.
4. Enter 0 to return to the BootWare menu, and then enter 1 to boot the syst em.
Using XMODEM to upgrade software through the
console port
1. Enter 2 in the BootWare menu to access the Serial submenu.
===========================<Enter Serial SubMenu>===========================
|Note:the operating device is cfa0 |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Update Backup Application File |
|<4> Update Secure Application File |
|<5> Modify Serial Interface Parameter |