HP Switch Services Modules - HP SECBLADEII-CMW520-R3175 Release Notes Release Notes

27
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-5):
Table 13 Serial submenu options
Item
Description
<1> Download Application Program To SDRAM
And Run
Download an application to SDRAM through
the serial port and run the program.
<2> Update Main Application File
Upgrade the main system software image.
<3> Update Backup Application File
Upgrade the backup system software image.
<4> Update Secure Application File
Upgrade the secure system software image.
<5> Modify Serial Interface Parameter
Modify serial port parameters
<0> Exit To Main Menu
Return to the BootWare menu.
NOTE:
If you use the baud rate of 9600 bps, jump to step 10.
2. Enter 5 to enter the baud rate setting menu.
===============================<BAUDRATE SET>===============================
|Note:'*'indicates the current baudrate |
| Change The HyperTerminal's Baudrate Accordingly |
|---------------------------<Baudrate Avaliable>---------------------------|
|<1> 9600(Default)* |
|<2> 19200 |
|<3> 38400 |
|<4> 57600 |
|<5> 115200 |
|<0> Exit |
============================================================================
Enter your choice(0-5):
3. Select an appropriate baud rate for the console port. For example, enter 5 to select
115200 bps.
The following messages appear:
Baudrate has been changed to 115200 bps.
Please change the terminal's baudrate to 115200 bps, press ENTER when ready.
NOTE:
Typically the size of a .bin file is over 10 MB. Even at 115200 bps, the download takes about
30 minutes.
4. Select Call > Disconnect in the HyperTerminal window to disconnect the terminal from
the firewall card.