HP TMS zl Module Security Administrator's Guide

2-20
Managing TMS zl Firewalls
Viewing Firewall Configurations
NAT Addresses
The Address subtab on the Firewall > NAT Policies tab for the TMS zl node or
a specific TMS zl module displays the following information for all NAT
Address and Address Group policies configured on the selected TMS zl
device(s):
Figure 2-14. TMS-Firewall Tab, NAT Policies > NAT Addresses Subtab
Information shown on the Addresses subtab is also displayed on the Access
Policies, NAT Policies, and Port Triggers tabs, and changes to one affects all
these tabs.
Name Name of the address object. Double-click the folders in this column to
display subordinate folders.
Type Whether the address object is an IP address, network, IP address range,
or DNS name (does not apply to device and group nodes)
Address/FQDN IP address or Fully Qualified Domain Name (FQDN) for address object
(does not apply to other nodes)