HP TMS zl Module Security Administrator's Guide

2-27
Managing TMS zl Firewalls
Configuring Firewalls
• Schedule objects, which specify any combination of days of week and
time of day.
Some manual configuration must be completed at the TMS zl module before
NIM can be used to manage configurations, as explained in Configuring TMS
zl Modules.
NAT policies and VPN policies support only single-entry address objects and
service objects. The following table identifies when you can use each object
type:
To Add/Modify a Named Object:
1. Navigate to the Named Object Wizard:
a. Right-click the TMS zl node or a TMS zl module in the navigation tree.
b. Select Firewall from the drop-down list.
c. Select Named Objects Wizard in the Firewall list.
You can also open the Named Object Wizard by clicking the Named Object
Wizard button on the Addresses, Services, and Schedules tabs of the Firewall
Access Policies subtab and the Services and Schedules tabs of the NAT
Policies and Port Triggers subtabs.
Object Type Firewall NAT Port Trigger VPN
Single-Entry
IP xxx x
IP Range x x x x
Network xxx x
Single Port x x x x
Schedule x
Multiple-Entry
IP x x
IP Range x x
Network x x
Domain x x
Port Range x x
Address Objects x x
Service Objects x