HP TMS zl Module Security Administrator's Guide

2-33
Managing TMS zl Firewalls
Configuring Firewalls
Figure 2-23. Named Object Wizard, Service Configuration
a. In the Configure window, click Add, which creates a named object
with the default name NewService<n>. The Add and Del buttons can
be used only when Add is selected on the Select Configuration Action
window.
b. In the Name field, replace NewService<n> with the name that will
be used to identify the service.
c. Use the Protocol/Ports drop-down list to select the protocol to include
in the named object.
d. If the protocol selected is TCP or UDP, the Start Port and End Port fields
are enabled. To select a single port, type the port number used for the
selected protocol in the Start Port field. To include a range of ports,
type the lowest port number in the Start Port field and the highest port
number in the End Port field.
e. If you are defining multiple objects and want to remove one, select it
and click Del. The Add and Del buttons can be used only when Add is
selected on the Select Configuration Action window.
f. Click Next.