HP TMS zl Module Security Administrator's Guide

2-39
Managing TMS zl Firewalls
Configuring Firewalls
c. Click >> to move the selected device to the Selected Devices pane.
d. To unselect a selected device, highlight the module in the Selected
Devices list and click <<.
e. Click Next.
5. Select the named objects to be removed.
a. In the Available list, highlight each object that you want to delete.
b. To filter this list, type the text to be excluded from the list.
c. Click >> to select the device.
d. Click Next.
6. Review the Summary of Changes:
a. Ensure the information displayed on the Summary of Changes win-
dow reflects the devices and objects you want to delete.
b. To permanently delete the selected objects fro the security device,
check the Save Configuration check box.
If the device(s) on which this configuration change is applied dons
the Master role in a high-availability cluster, these configuration
changes will not be automatically synchronized to the participant.
To synchronize to the participant, you must synchronize the configu-
ration after completing this wizard.
c. Click Next.
7. Apply the settings to the selected device:
a. To end the process before it completes, click Halt. The process will
be ended as soon as the property currently being configured is com-
plete.
b. To display a summary listing whether the properties for each device
were deleted from the device, click Summary.
c. Ensure the Status column or Summary shows that the object was
deleted successfully for each device. If unsuccessful, close and rerun
the wizard, using the correct values.
8. Click Close to close the wizard.
Configuring Firewall Properties
Use the Firewall Access Properties Wizard to configure firewall properties on
one or more firewall devices. The read and write community names configured
on the device must be defined in PCM before using a wizard.