HP TMS zl Module Security Administrator's Guide

2-40
Managing TMS zl Firewalls
Configuring Firewalls
Note: Some manual configuration must be completed at the TMS zl module before
NIM can be used to manage configurations, as explained in Configuring TMS
zl Modules.
1. Navigate to the Firewall Access Properties Wizard by clicking the Firewall
Properties button on the tab toolbar.
OR
Right-click the security device in the navigation tree, select Firewall, and
then select Firewall Access Properties Wizard from the drop-down list.
2. Optionally, when the wizard appears, click Click here to refresh now to
update PCM with the current device settings.
3. Click Next.
Figure 2-29. Firewall Access Properties Wizard, Select Configuration and Action
4. On the Select Configuration Property and Action window, check each type
of property you want to configure.