HP TMS zl Module Security Administrator's Guide

2-41
Managing TMS zl Firewalls
Configuring Firewalls
a. For Port Maps, Connection Timeouts Custom, and Connection Allo-
cation Reservations, select whether you want to Add, Modify, or
Delete the selected property.
b. Click Next.
5. Select the device(s) you want to configure.
a. Use the drop-down list under Available Devices to select the Agent
where firewall access policies will be configured.
b. In the Available Devices list, highlight each firewall device that you
want to configure. To display devices, double-click the folders.
c. Click the >> button to move the selected device to the Selected
Devices list.
d. To remove a selected device, highlight the firewall device in the
Selected Devices list and click the << button.
6. Click Next.
Property Type Description
IP Reassembly How fragmented IP packets are reconstructed by a
router before forwarding them to their destination
Operating Mode How the security device will be used (for Routing,
which filters traffic by VLAN, or as a Monitor, which
monitors threats but does not prevent or block them)
Attack Settings Types of threats monitored, which provides an
additional level of security
Connection Allocation Zone Limits Maximum number of connections per Zone
RADIUS Configuration Configuration of RADIUS servers used for
authentication
Connection Allocation Reservations Amount of bandwidth reserved for a zone. This
function is especially useful for guaranteeing
connections during heavy traffic or a Denial of
Service attack.
Connection Timeouts Default How long an inactive session should remain open
Connection Timeouts Custom Default timeout for a specific service
Port Maps Ports used for specific services