HP TMS zl Module Security Administrator's Guide

2-51
Managing TMS zl Firewalls
Configuring Firewalls
a. Ensure the information displayed on the Summary of Changes win-
dow reflects the device and properties you want to configure.
b. To permanently save these configuration changes on the security
device, check the Save Configuration check box.
If the device(s) on which this configuration change is applied dons
the Master role in a high-availability cluster, these configuration
changes will not be automatically synchronized to the participant.
To synchronize to the participant, you must synchronize the configu-
ration after completing this wizard.
c. Click Next.
17. Deploy the configuration changes, monitor the configuration status, and
view the results.
a. To end the process before it completes, click Halt. The process will
be ended as soon as the property currently being configured is com-
plete.
b. To display a summary listing whether the properties for each device
were configured on the device, click Summary.
c. Ensure the Status column or Summary shows that the configuration
change was completed successfully for each device. If unsuccessful,
close and rerun the wizard, using the correct values.
18. To close the window, click Close.
Configuring Firewall Zone Properties
The Zone Wizard is used to configure firewall zone properties on one or more
firewall devices. Based on the operating mode of the firewall device, you can
either configure VLANs for the selected zones or configure management
zones. Management zones are zones from which TMS zl Module configuration
is allowed. Based on the VLANs associated with zones, management access
(SSH, Web UI, SNMP) is allowed or denied to users.
Note: Some manual configuration must be completed at the TMS zl module before
NIM can be used to manage configurations, as explained in Configuring TMS
zl Modules.