HP TMS zl Module Security Administrator's Guide

2-52
Managing TMS zl Firewalls
Configuring Firewalls
To associate VLANs with a zone:
1. Navigate to the Zone Wizard.
i. Right-click the TMS zl node or a TMS zl module in the navigation
tree.
ii. Select TMS-Network from the drop-down list.
iii. Select Zone Wizard from the Firewall drop-down list.
2. Optionally, when the wizard appears, click Click here to refresh now to
update PCM with the current zone settings on the selected device(s).
3. Click Next.
4. Select VLAN Configuration as the zone configuration action.
5. Select the firewall devices to be configured.
6. Select the VLANs to protect.
7. Configure the VLANs and IP addresses for the zone.
8. Ensure the Summary information is correct and complete the wizard.
9. Click Next to deploy your changes to the selected device.
10. Click Close to close the wizard.
Figure 2-37. Zone Wizard, Configure VLANs to Firewall Zones