HP TMS zl Module Security Administrator's Guide

2-53
Managing TMS zl Firewalls
Configuring Firewalls
To configure a management zone:
1. Navigate to the Zone Wizard.
i. Right-click the TMS zl node or a TMS zl module in the navigation
tree.
ii. Select Firewall from the drop-down list.
iii. Select Zone Wizard from the Firewall drop-down list.
2. Optionally, when the wizard appears, click Click here to refresh now to
update PCM with the current zone settings on the selected device(s).
3. Click Next.
4. Select Management Access as the zone configuration action.
5. Select the firewall devices to be configured.
6. Configure the Management Zones.
7. Ensure the Summary information is correct and complete the wizard.
8. Click Next to deploy your changes to the selected device.
9. Click Close to close the wizard.
To rename a zone:
1. Navigate to the Zone Wizard.
i. Right-click the TMS zl node or a TMS zl module in the navigation
tree.
ii. Select TMS-Network from the drop-down list.
iii. Select Zone Wizard from the Firewall drop-down list.
2. Right-click the TMS zl node or a TMS zl module in the navigation tree.
3. Select Firewall from the drop-down list.
4. Select Zone Wizard from the Firewall drop-down list.
5. Optionally, when the wizard appears, click Click here to refresh now to
update PCM with the current zone settings on the selected device(s).
6. Click Next.
7. Select Rename zones as the zone configuration action.
8. Select the firewall devices to be configured.
9. Rename the Zone(s).
10. Ensure the Summary information is correct and complete the wizard.
11. Click Next to deploy your changes to the selected device.