HP TMS zl Module Security Administrator's Guide

2-64
Managing TMS zl Firewalls
Configuring Firewalls
To Create a NAT Policy:
1. Navigate to the NAT Policies Wizard.
a. Right-click the TMS zl node or a TMS zl module in the navigation tree.
b. Select Firewall from the drop-down list.
c. Select NAT Policies Wizard from the Firewall drop-down list.
You can also open the NAT Policies Wizard by clicking the NAT Policies
Wizard button on the Policies tab of the Firewall NAT Policies subtab.
2. Optionally, when the wizard appears, click Click here to refresh now to
update PCM with the current settings on the selected device(s).
3. Click Next.
4. Select the Add action to create a NAT policy to the firewall device and
click Next.
5. Select the devices to configure.
a. If displayed, use the Available Devices drop-down list to select the
Agent managing the TMS zl module.
b. In the Available Devices list, highlight each TMS zl module where you
want to configure. To display devices managed by the selected Agent,
double-click the folders.
c. Click >> to move the selected device to the Selected Devices pane.
d. To remove a selected device, highlight the module in the Selected
Devices list and click <<.
e. Click Next.