HP TMS zl Module Security Administrator's Guide

2-65
Managing TMS zl Firewalls
Configuring Firewalls
6. Configure the policy.
Figure 2-42. NAT Policies Wizard, Configure Policy
a. In the Select NAT policy pane of the Configure window, click Add,
which creates a NAT policy with the default name NewRule<n>. The
Add and Del buttons can be used only when Add is selected on the
Select Configuration Action window.
b. Use the Translate drop-down list to select the type of traffic to be
translated by the device:
All other translation filters are optional. You must specific the NAT IP
address if you elect to translate source or destination traffic.
c. Use the From Zone drop-down list to select the source zone of packets
that will be translated.
Source Translate the source device IP address contained in a
packet
Destination Translate the destination device IP address contained in
a packet
None Prevent addressed specified in source and destination
from being translated