HP TMS zl Module Security Administrator's Guide

2-67
Managing TMS zl Firewalls
Configuring Firewalls
If the device(s) on which this configuration change is applied dons
the Master role in a high-availability cluster, these configuration
changes will not be automatically synchronized to the participant.
To synchronize to the participant, you must synchronize the configu-
ration after completing this wizard.
To Prioritize NAT Policies:
Prioritize NAT policies to identify the order in which NAT policies will be
executed. To prioritize NAT policies open the NAT Policies Wizard (right-click
device and select Firewall>NAT Policies Wizard), and follow the same steps
as in “To Prioritize Access Policies:” on page 2-59.
To Delete a NAT Policy:
To delete a NAT policy open the NAT Policies Wizard (right-click device and
select Firewall>NAT Policies Wizard), and follow the same steps as in “To
Delete an Access Policy:” on page 2-61
Configuring Port Triggers
The Port Trigger Wizard is used to configure ports for non-standard uses. To
configure a port trigger:
1. Navigate to the Firewall Port Trigger Wizard by clicking Click the Port
Trigger Wizard button on the Policies tab of the Firewall Port Triggers
subtab. Or by using the following method:
a. Right-click the TMS zl node or a TMS zl module in the navigation tree.
b. Select Firewall from the drop-down list.