HP TMS zl Module Security Administrator's Guide

3-12
Configuring a TMS zl Module as an IPS
Configuring IPS
Setting these values to 0 (zero) results in full inspection.
6. To permanently save the configuration as the secondary configuration on
the module, check the Save configuration to selected device(s) check box.
Otherwise, your configuration changes are only made in the module’s
running configuration.
7. Click OK, which opens the result window and starts the configuration
change.
8. Click Halt at any time to cancel the update process, which closes the
wizard after the current TMS module is updated. Halt cancels the update
process on those TMS modules for which it has not started. If the update
process on a TMS module has already started, Halt cannot cancel it.
9. To display a summary of the Settings operation execution, click Summary.
10. Click Close to close the dialog.
Configuring IPS Protocol Anomalies
The IPS Protocol Anomalies window is used to configure acceptable sizes for
common packet payloads for http, SMTP, and Mime protocols on the selected
IPS/IDS devices. (Additional protocols can be configured at the TMS zl mod-
ule.)
Note: Protocol anomalies will be configured on the TMS zl module immediately, but
will not be implemented until IPS is enabled.