HP TMS zl Module Security Administrator's Guide

3-15
Configuring a TMS zl Module as an IPS
Configuring IPS
Configuring IP Actions
The IPS Actions window is used to configure the action to take for events
based on their severity. For example, when the selected module receives a
critical event, it takes the action configured for critical severity.
IPS Actions will be configured on the TMS zl module immediately, but will not
be implemented until IPS is enabled. IPS Actions configuration is not applica-
ble for a module currently operating in IDS mode.
.
Figure 3-6. IPS Actions
1. Navigate to the IPS Actions window:
To update a single module:
a. Right-click the IPS TMS zl module in the PCM navigation tree or the
Devices List.