HP TMS zl Module Security Administrator's Guide

1-8
Managing TMS zl Modules
Introduction
Manually Enabling Management Through PCM+/NIM
To manually enable management through PCM+/NIM, you must first configure
some settings on the TMS zl Module:
1. Associate the PCM+/NIM server’s VLAN with a zone, preferably a manage-
ment-access zone.
2. If the PCM+ server is not in a management-access zone, configure firewall
access policies to permit at least ICMP/Echo, SNMP, SNMP traps, Telnet,
SSH, and HTTPS traffic to the PCM+ server.
You should also create any other policies that PCM+ and the TMS zl
Module will need to communicate. The necessary policies depend on how
you are using the devices on your network.
3. Configure SNMPv1/2c with the PCM+ server’s community names or
SNMP3 with the user settings configured on PCM+.
For more information about managing the TMS zl Module through PCM+/NIM,
see the HP Manager Network Administrator’s Guide, version 3.10 or later.