HP TMS zl Module Security Administrator's Guide

3-16
Configuring a TMS zl Module as an IPS
Configuring IPS
b. Select TMS-IPS.
c. Select Actions from the drop-down list.
OR
a. Select the TMS zl node in the navigation tree.
b. Click the Devices List tab.
c. Select the module you want to update.
d. Click the IPS Configuration menu on the window toolbar and select
Actions from the drop-down list.
To update multiple modules:
a. Select the TMS zl folder in the PCM navigation tree.
b. Display the Devices List tab.
c. Select the modules you want to update.
d. Click the IPS Configuration menu button on the window toolbar and
select Actions from the drop-down list.
2. Select the action to take for each threat level. Possible choices are:
3. To permanently save the configuration as the secondary configuration on
the module, check the Save configuration to selected device(s) check box.
Otherwise, your configuration changes are only made in the module’s
running configuration.
4. Click OK, which opens the result window and starts the configuration
change.
5. Click Halt at any time to cancel the update process, which closes the
wizard after the current TMS module is updated. Halt cancels the update
process on those TMS modules for which it has not started. If the update
process on a TMS module has already started, Halt cannot cancel it.
6. To display a summary of the update actions, click Summary.
7. Click Close to close the window.
Terminate session Terminate the session with a packet detected as a threat
Block matched packet Block traffic detected as a threat
Allow matched packet Allow all traffic of the selected severity level, even if it is
detected as a threat