HP TMS zl Module Security Administrator's Guide

4-37
Configuring a VPN on the HP TMS zl Module
Configure an IPsec Client-to-Site VPN
Figure 4-17. Deploy IPsec Remote-Access VPN Wizard > Configure Local Network
11. For Local Network Address, specify the IP addresses for all local servers
or endpoints to which remote users are allowed access.
Do one of the following to specify addresses:
• Manually type an IP address, IP address range, or network address in
CIDR format.
• Select a subnet.
The Deploy IPsec Remote-Access VPN wizard automatically includes
the subnets configured on TMS VLANs.
• Select the single-entry IP, range, or network address object that you
created earlier for local endpoints.
An address object is not valid if you plan to configure IKE mode
config.