HP TMS zl Module Security Administrator's Guide

4-46
Configuring a VPN on the HP TMS zl Module
Configure an IPsec Client-to-Site VPN
When you set up firewall access policies to permit traffic between the
remote endpoints and the private network, select this zone as the source
zone.
14. For IP Address Ranges, type one or more ranges of IP addresses in the same
subnet as the IRAS. Type each range on its own line, using this format:
<first address>-<last address>. For example, type 172.16.100.2-172.16.100.254.
Each remote client will be assigned an address from this pool while
visiting your private network. (You can view clients’ addresses in the TMS
- VPN > Connections > IP Address Pool window.
Remember: you should have specified this same range for the Remote
Address of this policy’s traffic selector.
15. For Primary DNS Server, type the IP address of a DNS server that the remote
client is allowed to access.
16. For Secondary DNS Server, type the IP address of a secondary DNS server
that the remote client is allowed to access, if applicable.
17. For Primary WINS Server, type the IP address of a primary WINS server
that the remote client is allowed to access, if applicable.
18. For Secondary WINS Server, type the IP address of a secondary WINS
server that the remote client is allowed to access, if applicable.