HP TMS zl Module Security Administrator's Guide

4-67
Configuring a VPN on the HP TMS zl Module
Configure an IPsec Client-to-Site VPN
The TMS zl Module assigns each IPsec packet the DSCP value
assigned to the original IP packet.
• Select Set DSCP value and type a value between 0 and 63 in the box.
The TMS zl Module assigns every IPsec packet in this SA the DSCP
that you configure. 0 is the default value and requests normal handling
for the packet.
See “The Copying of Values from the Original IP Header” on page 4-23 for
more information.
36. Click Next.
Figure 4-36. Deploy IPsec Remote-Access VPN Wizard > Configuration Preview
37. Review the configuration settings you have selected. If you want to save
the changes as well as apply them, select the Save Configuration check box.
If the TMS zl Module is a master in a cluster and you want to immediately
synchronize the changes, select the Synchronize with High-Availability par-
ticipant check box.
If you need to change any settings, click Back until you reach the appro-
priate window and can select a different setting.