HP TMS zl Module Security Administrator's Guide

4-76
Configuring a VPN on the HP TMS zl Module
Configure an IPsec Client-to-Site VPN
Note When you are using wildcards to allow multiple clients to connect using this
IKE policy, you must configure a unique ID on each client to allow clients to
log in simultaneously. Both clients cannot have the same ID because if one
client is logged in and a second client attempts to log in with the same ID, the
first client is logged out.
Each client’s unique ID must match the wildcard in the module’s remote ID.
For example, if the remote ID type and value on the module are Domain Name
and company123.com, then one client can have user1.company123.com as its
ID and another client can have user2.company123.com.
11. If you are configuring multiple modules, remember to select each TMS zl
Module from the Devices list and repeat step 8 on 4-74 to step 10.
12. Click Next.
Note For the remaining parameters, the same settings are applied to all TMS zl
Modules selected for configuration by the wizard.
Figure 4-44. Manage IPsec Wizard > Add IKEv1 Policy (step 2) Window
13. Under IKE Authentication, configure the authentication method for the IKE
proposal: