HP TMS zl Module Security Administrator's Guide

4-99
Configuring a VPN on the HP TMS zl Module
Configure an IPsec Client-to-Site VPN
d. For IP Address Ranges, type one or more ranges of IP addresses in the
same subnet as the IRAS. Type each range on its own line, using this
format: <first address>-<last address>. For example, type 172.16.100.50-
172.16.100.74.
Each remote client will be assigned an address from this pool while
visiting your private network.
You can view these addresses in the TMS-VPN > Connections > Active
IP Pool Sessions window.
Remember: you should have specified this same range for the Remote
Address of this policy’s traffic selector.
e. For Primary DNS Server, type the IP address of a DNS server that the
remote client is allowed to access.
f. For Secondary DNS Server, type the IP address of a secondary DNS
server that the remote client is allowed to access, if applicable.
g. For Primary WINS Server, type the IP address of a primary WINS server
that the remote client is allowed to access, if applicable.
h. For Secondary WINS Server, type the IP address of a secondary WINS
server that the remote client is allowed to access, if applicable.
Later, you will create firewall access policies to permit traffic from the
IKE mode config addresses to these servers.
12. Click Next.