HP TMS zl Module Security Administrator's Guide

4-139
Configuring a VPN on the HP TMS zl Module
Configuring an IPsec Site-to-Site VPN with IKE
Figure 4-87. Deploy IPsec Site-to-Site VPN > Configure Identifiers
5. Under Site 1 Identifiers, first configure the ID that the Site 1 TMS zl Module
sends to authenticate itself. (For more information about ID types, see
“IKE Phase 1” on page 4-14.)
a. For Local ID type, select the ID type for the Site 1 module:
– IP Address
– Domain Name
– Email Address
– Distinguished Name
b. For Local ID Value, type the correct value for the Site 1 module’s ID.
If you select IP Address for the type, the value must be the IP address
that you earlier specified for the Site 1 gateway (or the IP address on
the specified VLAN).