HP TMS zl Module Security Administrator's Guide

4-140
Configuring a VPN on the HP TMS zl Module
Configuring an IPsec Site-to-Site VPN with IKE
Table 4-17 shows the format for each ID type.
Table 4-17. Local ID Values
6. Next specify the ID that the Site 2 TMS zl Module sends to authenticate
itself.
a. For Remote ID Type, select the ID type for the Site 2 module:
– IP Address
– Domain Name
– Email Address
– Distinguished Name
b. For Remote ID Value, type the correct value for the Site 2 module’s ID.
Again, if you select IP Address, you must specify the IP address earlier
specified for the Site 2 gateway.
Note The wizard will automatically generate settings for the Site 2 identifiers by
reversing the local and remote IDs.
Local ID Type Remote ID Value Examples
IP Address A.B.C.D 172.16.40.103
Domain Name <domainname> TMS.hp.com
Email Address <name>@<domainname> [e-mail]
Distinguished
Name
/CN=<commonname> /CN=TMS.hp.com