HP TMS zl Module Security Administrator's Guide

1-23
Managing TMS zl Modules
Configuring TMS zl Zones
Figure 1-13. Zone Configuration Wizard, Configure VLANS and IP Addresses
7. Configure the VLANs and IP addresses for the zone:
a. In the Selected VLANs list, highlight the VLAN you want to associate
to the zone. To display VLANs configured in a module double-click
the folders.
b. Use the Zone drop-down list to select the zone where the VLAN will
be associated. Selecting a zone activates the remaining fields. Select
None if no zones have been associated with the VLAN.
c. To automatically assign a dynamic IP address to the VLAN, select
DHCP.
To assign a permanent IP address to the VLAN, select Static.
d. If you selected Static, type the IP address you want to assign to the
VLAN in the IP Address field and type it's subnet mask in the Subnet
Mask field. This IP address must be unique within the Agent.
e. Click Restore to delete your entries and restore the displayed values.
The Restore button is activated after changes are made on the previous
window, but before changes are made on this window.