HP TMS zl Module Security Administrator's Guide

4-149
Configuring a VPN on the HP TMS zl Module
Configuring an IPsec Site-to-Site VPN with IKE
Figure 4-93. Deploy IPsec Site-to-Site VPN > Select the Hub and Spokes
4. Under Hub, select the TMS zl Module that is the hub of the site-to-site VPN.
That is, both of the other modules connect to it and not to each other.
a. For Agent, select the PCM+ agent that manages this module.
b. The Hub list is populated with all of the TMS zl Modules managed by
the selected agent. Select your module.
5. Under Spoke 1, select one of the TMS zl Modules that connects to the hub.
a. For Agent, select the PCM+ agent that manages this TMS zl Module.
b. For Spoke 1, select the module.
6. If you have a second spoke, select the Spoke 2 check box and select the
other TMS zl Module that connects to the hub module.
a. For Agent, select the PCM+ agent that manages this TMS zl Module.
b. For Spoke 2, select the module.
7. Click Next.