HP TMS zl Module Security Administrator's Guide

4-152
Configuring a VPN on the HP TMS zl Module
Configuring an IPsec Site-to-Site VPN with IKE
Refer to Figure 4-96 for help in configuring the next settings.
Figure 4-96. Example Hub and Spoke VPN
10. For Local Gateway on the Hub, specify the IP address or TMS VLAN at which
the other modules reach the hub module. You have two options:
•Select IP Address and type the IP address in the box.
The IP address must be an IP address that is configured on the TMS zl
Module and that the remote modules can reach (indicated by 1 in the
example figure).
•Select VLAN and select a VLAN from the list.
Select the VLAN on which the remote modules reach the TMS zl
Module (indicated by 1 in the example figure).