HP TMS zl Module Security Administrator's Guide

4-159
Configuring a VPN on the HP TMS zl Module
Configuring an IPsec Site-to-Site VPN with IKE
Figure 4-100. Deploy IPsec Site-to-Site VPN > Configure Public Interface for Hub
and Spoke 2
5. If you are configuring only two modules, move to step 9 on page 4-164.
Otherwise, refer to step 10 on page 4-152 and step 11 and follow the same
process to specify the public interface on the Hub and Spoke 2 modules.
In Figure 4-101, 1 indicates the Hub gateway IP address and VLAN and 5
indicates the Spoke 2 gateway address and VLAN.