HP TMS zl Module Security Administrator's Guide

4-179
Configuring a VPN on the HP TMS zl Module
Configuring an IPsec Site-to-Site VPN with IKE
4. Click Next.
Figure 4-117. Deploy IPsec Site-to-Site VPN > Configure Public Interface for Hub
and Spoke 2
5. If you are configuring only two modules, move to step 9 on page 4-184.
Otherwise, refer step 10 and step 11 on 4-174 and follow the same process
to specify the public interface on the Hub and Spoke 2 modules. In
Figure 4-118, 1 indicates the Hub gateway IP address and VLAN and 5
indicates the Spoke 2 gateway address and VLAN.