HP TMS zl Module Security Administrator's Guide

4-193
Configuring a VPN on the HP TMS zl Module
Configuring an IPsec Site-to-Site VPN with IKE
Figure 4-127. Deploy IPsec Site-to-Site VPN > Configuration Preview
29. Review the configuration settings you have selected. If you want to save
the changes as well as apply them, select the Save Configuration check box.
If any of the TMS zl Modules is a master in a cluster and you want to
immediately synchronize the changes, select the Synchronize changes to
Participant check box.Note that this will cause the participant to reboot.
If you need to change any settings, click Back until you reach the appro-
priate window and can select a different setting.
When you are ready to apply the configuration, click Next in the Configu-
ration Preview window.
30. A window is displayed, showing the settings being applied to the TMS zl
Module. When you see that they have been applied successfully, click
Close.
Move to “Create Access Policies for the TMS zl Modules in the IPsec Site-to-
Site VPN” on page 4-194.