HP TMS zl Module Security Administrator's Guide

4-241
Configuring a VPN on the HP TMS zl Module
Configuring an IPsec Site-to-Site VPN with Manual Keying
Figure 4-164. Manage IPsec Wizard > Add IPsec Policy (step 1) Window
4. For Policy Name, type an alphanumeric string between 1 and 32 characters.
The string must be unique to this policy.
5. By default, the Enable this policy check box is selected, which means that
the policy will begin taking effect as soon as you finish it. Clear the check
box if you want to enable the policy later.
6. For Action, keep the default, Apply.
7. For Position, type a number.
The position determines the order in which the TMS zl Module processes
IPsec policies. The module processes the policy with the lowest value first
(for example, position 1 before position 2). The position matters most
when policies have overlapping traffic selectors. In this case, assign the
highest position (lowest value) to the IPsec policy with the most specific
traffic selector.
A default IPsec policy prevents all traffic from being encrypted by the VPN
engine; therefore, all IPsec policies that you configure must have a higher
priority than this default policy.