HP TMS zl Module Security Administrator's Guide

1-35
Managing TMS zl Modules
Configuring Authentication
5. Configure the user:
Figure 1-23. Manage Users Wizard, Configure L2TP User
a. Select the TMS zl Module on which the user will be configured.
b. In the User field, type the name of the L2TP user.
c. In the Password and Confirm Password fields, type the password that
the L2TP user will enter when logging in. You must enter the same
password in both fields.
d. In the User Group field, select the user group to which the user is
assigned from the drop-down list.
e. In the Authentication Protocol field, select the type of authentication
protocol used from the drop-down list.
f. In the Tunnel Configuration, Server IP Address field, type the IP address
of the server used for the L2TP tunnel.
g. In the Tunnel Configuration, User IP Address field, type the IP address
of the device at the user end of the L2TP tunnel.