HP TMS zl Module Security Administrator's Guide

4-263
Configuring a VPN on the HP TMS zl Module
L2TP over IPsec VPNs
– Distinguished Name
You can select any type.
b. For Value, type the correct value.
If you select IP Address for Typ e, the address that you specify in the
Value box must match the IP address that you specified for the local
gateway.
Table 4-30 shows the format for each ID type.
Table 4-30. Local ID Values
10. For Remote ID, specify an ID that matches the ID that remote clients send
to authenticate themselves. Table 4-31 displays valid remote ID types and
values for L2TP clients.
a. For Type , select the ID type:
– IP Address
– Domain Name
– Email Address
– Distinguished Name
Note that you should select IP Address or Domain Name if this IKE
policy will specify pre-shared key authentication.
b. For Value, type the correct value.
Table 4-31. Valid Remote IDs for an L2TP over IPsec VPN to Windows Clients
Local ID Type Remote ID Value Examples
IP Address A.B.C.D 172.16.40.103
Domain Name <domainname> TMS.hp.com
Email Address <name>@<domainname> [e-mail]
Distinguished Name /CN=<commonname> /CN=TMS.hp.com
Remote ID Type Remote ID Value for Preshared Key
IP Address 0.0.0.0
Domain Name <domainname>
Example: hp.com
Email not applicable
Distinguished Name not applicable