HP TMS zl Module Security Administrator's Guide

1-36
Managing TMS zl Modules
Configuring Authentication
h. In the Primary DNS Server field, type the IP address of the DNS server
used to translate IP addresses to a more user-friendly host name.
i. In the Secondary DNS Server field, type the IP address of the backup
DNS server used when the primary DNS is unavailable.
j. In the Primary WINS Server field, type the IP address of the WINS server
used to translate NetBIOS names.
k. In the Secondary WINS Server field, type the IP address of the backup
WINS server used when the primary WINS server is unavailable.
l. Click Add to configure the new L2TP user under the selected TMS zl
Module.
m. Click Add to save your entries and add the user.
To add more L2TP users, repeat the steps in step 5.
n. When you have finished adding users, click Next.
6. Ensure the Summary information is correct and complete the wizard:
a. Ensure the information displayed in the Summary window reflects
the modules and correct configuration changes.
b. To permanently save these configuration changes on the module,
check the Save Configuration check box.
7. Click Next to deploy your changes to the selected module.
8. Click Close to close the wizard.
Note If the device(s) on which this configuration change is applied becomes a
Master module in a high-availability cluster, these configuration changes will
not be automatically synchronized to the Participant.
To synchronize to the Participant, you must use the Synchronize Configuration
function after completing this wizard. See “Synchronizing the HA Cluster or
HA Configuration” on page 1-71.