HP TMS zl Module Security Administrator's Guide

4-276
Configuring a VPN on the HP TMS zl Module
L2TP over IPsec VPNs
Figure 4-191. Manage IPsec Wizard > Configuration Preview
10. Review the configuration settings you have selected. If you want to save
the changes as well as apply them, select the Save Configuration check box.
If the TMS zl Module is a master in a cluster and you want to immediately
synchronize the changes, select the Synchronize changes to Participant
check box.Note that this will cause the participant to reboot.
If you need to change any settings, click Back until you reach the appro-
priate window and can select a different setting.
When you are ready to apply the configuration, click Next in the Configu-
ration Preview window.
11. A window is displayed, showing the setting being applied to the TMS zl
Module. When you see that they have been applied successfully, click
Close.
Create an IPsec Policy for an L2TP over IPsec VPN
This section explains how to configure an IPsec policy for an L2TP over IPsec
VPN. The IPsec policy selects L2TP traffic between the TMS zl Module and
remote endpoints. It also includes settings that will be negotiated during IKE
phase 2.