HP TMS zl Module Security Administrator's Guide

4-287
Configuring a VPN on the HP TMS zl Module
L2TP over IPsec VPNs
See “Configure L2TP Authentication to an External RADIUS Server” on
page 4-301.
Configure Local L2TP Authentication
When authenticating users to the local database, you must:
1. Create a user group for the L2TP over IPsec users.
2. Add L2TP dial-in users.
Note You can authenticate a maximum of 100 L2TP users to the TMS zl Module’s
local database. If you need to authenticate more than 100 L2TP users, config-
ure L2TP authentication to an external RADIUS server.
Create a User Group. This section includes the basic steps for setting up a
user group.
1. It is important that you are at the correct level in the navigation tree when
you launch the Manage Users wizard:
• To configure one TMS zl Module, select the module in the navigation
tree.
• If you want to configure multiple modules, select the TMS zl folder.
2. Launch the Manage Users wizard in one of two ways:
• Right-click the folder or device name in the navigation tree and select
TMS - Network > Manage Users.
• In the main configuration window, click TMS - Network. Then click
the Manage Users Wizard icon.
Figure 4-202. PCM+ > TMS-Network Window
3. In the Manage Users Wizard, click Next.
Manage Users
Wizard