HP TMS zl Module Security Administrator's Guide

4-293
Configuring a VPN on the HP TMS zl Module
L2TP over IPsec VPNs
Note You can authenticate only 100 L2TP users to the local database. If you need
to authenticate more than 100 L2TP users, you must authenticate these users
to an external RADIUS server. See “Configure L2TP Authentication to an
External RADIUS Server” on page 4-301 for instructions.
Follow these steps:
1. First verify that you are at the correct location in the network tree:
• To add users to multiple TMS zl Modules, the TMS zl folder
• To add users to one module, the module within the TMS zl folder
2. You can add an L2TP user in one of two ways.
• If you are configuring a single module, you can click TMS - Network >
Authentication > L2TP Users in the main configuration window. Right-
click the TMS zl Module’s name and select Add. Move to step 3 on 4-
296.
Figure 4-208. PCM+ > TMS-Network > Authentication > L2TP Users Window
• You can also open the Manage Users wizard as you did before either
by right-clicking the folder or device in the network tree or by clicking
the icon.