HP TMS zl Module Security Administrator's Guide

4-311
Configuring a VPN on the HP TMS zl Module
L2TP over IPsec VPNs
Figure 4-228. Firewall Properties Wizard > Summary of Changes Window
16. Review the configuration settings you have selected. If you want to save
the changes as well as apply them, select the Save Configuration check box.
If any of the TMS zl Modules is a master in a cluster and you want to
immediately synchronize the changes, select the Synchronize changes to
participant check box.Note that this will cause the participant to reboot.
If you need to change any settings, click Back until you reach the appro-
priate window and can select a different setting.
When you are ready to apply the configuration, click Next in the Summary
of Changes window.
17. A window is displayed, showing the settings being applied. When you see
that they have been applied successfully, click Close.
Configure RADIUS Authentication for L2TP. You must now configure
the TMS zl Module to authenticate users to the external RADIUS server.
Follow these steps for each TMS zl Module that you are configuring:
1. You should be at the TMS-Network > Authentication tab.
2. Click the RADIUS Related Configuration tab.