HP TMS zl Module Security Administrator's Guide

4-312
Configuring a VPN on the HP TMS zl Module
L2TP over IPsec VPNs
Figure 4-229. PCM+ > Network > Authentication > RADIUS Related Configuration
Window
3. Under your TMS zl Module, right-click mschap and select Modify.
4. Select the Use RADIUS to authenticate L2TP clients check box.
5. For L2TP Server IP Address, type the IP address that the TMS zl Module will
use on L2TP connections.
This IP address cannot be on a subnet that is already configured on the
TMS zl Module. It must be a virtual IP address in the same subnet as the
virtual IP addresses that will be assigned to L2TP users.
6. If you want to save these configurations to the TMS zl Module (as well as
apply them), select the Save Configurations check box.